Yellowtail Kingfish Fish Sticker

Our Yellowtail Kingfish Fish Sticker is made from top-quality marine-grade vinyl with exceptional durability and resilience in marine environments. The sticker comes in four sizes however if you need a custom size simply contact us for a quote.

Materials:

• Yellowtail Kingfish Fish Sticker
• Squeegee or credit card
• Mild detergent
• Clean cloth
• Masking tape
• Pin

Preparation:

1. Ensure the surface of your boat is clean and free from dirt, dust, and grease.
2. Use a mild detergent and a clean cloth to thoroughly clean the area where you’ll be applying the sticker.
3. Allow the surface to dry completely before proceeding.

Application of Yellowtail Kingfish Sticker:

1. Position the fish sticker on the desired spot on your boat. Step back to make sure it is straight and in a good spot on the boat.  Take your time with placement.
2. Use masking tape to secure the sticker in place.
3. Peel off the backing of the sticker to expose the adhesive side.
4. Carefully fold the sticker back along the hinge created by the masking tape.
5. Starting from the top edge, use a squeegee or credit card to slowly smooth out the sticker, working from the centre outward.
6. Remove the masking tape and continue smoothing out any air bubbles or wrinkles as you go.
7. Once the sticker is fully applied, firmly press down on the entire surface to ensure proper adhesion.

Finishing Touches:

1. After applying the sticker, go over the entire surface again with the squeegee to ensure it’s firmly adhered.
2. If there are air bubbles prick them with a pin and push the air out with your finger.

With these simple steps and high-quality materials, your Yellowtail Kingfish Fish Sticker will enhance the look of your boat and withstand the rigours of marine life for years to come.