Chrome Snapper Fish Sticker

$39.95$355.95

Chrome Snapper Fish Stickers.  The most vivid and durable fish decals on the market – we sell world wide. Available in four sizes from 320mm long to 1300 mm long, port and starboard mirror sets.

SKU: N/A Category:

Description

Chrome Snapper Fish Sticker

Applying the Chrome Snapper fish sticker is easy at home.  We use quality marine-grade vinyl when printing our Marine Graphics Ink Fish Sticker range so it is easy to work with.

Preparing the Boat Surface:

  • Prepping the Surface: Prior to applying the Chrome Snapper fish sticker, clean the boat’s surface thoroughly with soap and water to remove any dirt, grease, or residue.
  • Gentle Cleaning: Use a mild detergent and a soft cloth or sponge to gently clean around the mud crab decal. A small amount of dishwashing liquid is ideal
  • Allow it to dry completely before proceeding.

Applying your Chrome Snapper Fish Sticker:

  1. Secure Placement: Begin by positioning the fish sticker on the boat’s surface using masking tape. This ensures accurate placement before permanent adhesion.
  2. Half Peel Method: Peel off half of the backing sheet from the Chrome Snapper Fish sticker, exposing the adhesive side. From the middle out firmly press down the exposed half onto the cleaned surface.
  3. Remove Backing Sheet: Carefully remove the remaining backing sheet from the opposite side of the fish decal. Apply firm pressure as you smooth down this side onto the boat, ensuring a tight bond with the surface.
  4. Finishing Touches: Once fully applied, use a squeegee or soft cloth to remove any air bubbles and ensure a smooth, uniform finish for your snapper fish decal.  If you have any air bubbles prick them with a small pin and use your finger to press the air out of the bubble.

Cleaning a Vinyl Boat Decal :

  • Routine Maintenance: Wash the mud crab sticker with soap and water to keep it clean and maintain its appearance after using the boat

How to Remove an old boat decal:

  • Heat Method: To remove an old decal use a heat gun or hairdryer to gently warm the vinyl. Once heated, carefully peel off the decal, starting from one corner and pulling slowly to avoid damaging the boat’s surface. Any remaining adhesive can be removed with a mild adhesive remover.

 

Superior Quality: Made from high-grade vinyl, our stickers are waterproof, UV-resistant, and built to withstand the harshest marine environments.

Easy Application: Effortlessly apply these stickers to the sides of your boat for an instant visual upgrade. They adhere firmly and can be easily removed without leaving residue.

Versatile Sizing: Available in various sizes to suit your boat’s dimensions perfectly, ensuring seamless integration into your maritime masterpiece.  Not seeing the size you want?  Contact us to customise the Chrome Snapper  sticker to your requirements

Additional information

Dimensions N/A
Fish Sticker size

320mm, 640mm, 990mm, 1300mm