Mud Crab Boat Stickers

$39.95$355.95

Mud Crab Boat  Stickers are part of the MGI fish decals collection. Printed on UV-protected marine-grade vinyl. The most vivid and durable fish stickers on the market. Available in four sizes from 320mm long to 1300 mm long, port and starboard mirror sets.

 

Mud Crab Boat Stickers - Applying Vinyl Decals to Your Boat

The Mud Crab Boat Stickers are easy to apply at home.  We use quality marine-grade vinyl when printing our Marine Graphics Ink Fish Sticker range so it is easy to apply at home.

We took our boat decal collection directly from the MGI Boat Wrap Range.  With the quality illustration that you have come to expect from MGI you know that this sticker is a combination of high-quality graphics and durable materials.

How to Prepare the Boat Surface:

  • Prepping the Surface: Prior to applying the mud crab sticker, clean the boat's surface thoroughly with soap and water to remove any dirt, grease, or residue.
  • Gentle Cleaning: Use a mild detergent and a soft cloth or sponge to gently clean around the mud crab decal. A small amount of dishwashing liquid is ideal
  • Allow it to dry completely before proceeding.

Applying Vinyl Mud Crab Boat Stickers:

  1. Secure Placement: Begin by positioning the fish sticker on the boat's surface using masking tape. This ensures accurate placement before permanent adhesion.
  2. Half Peel Method: Peel off half of the backing sheet from the mud crab sticker, exposing the adhesive side. From the middle out firmly press down the exposed half onto the cleaned surface.
  3. Remove Backing Sheet: Carefully remove the remaining backing sheet from the opposite side of the mud crab decal. Apply firm pressure as you smooth down this side onto the boat, ensuring a tight bond with the surface.
  4. Finishing Touches: Once fully applied, use a squeegee or soft cloth to remove any air bubbles and ensure a smooth, uniform finish for your mud crab decal.  If you have any air bubbles prick them with a small pin and use your finger to press the air out of the bubble.

Cleaning a Vinyl Boat Decal :

  • Routine Maintenance: Wash the mud crab boat sticker with soap and water to keep it clean and maintain its appearance after using the boat

Removing a boat decal:

  • Heat Method: To remove an old decal use a heat gun or hairdryer to gently warm the vinyl. Once heated, carefully peel off the decal, starting from one corner and pulling slowly to avoid damaging the boat's surface. Any remaining adhesive can be removed with a mild adhesive remover.

 

Superior Quality: Made from high-grade vinyl, our stickers are waterproof, UV-resistant, and built to withstand the harshest marine environments.

Easy Application: Effortlessly apply these stickers to the sides of your boat for an instant visual upgrade. They adhere firmly and can be easily removed without leaving residue.

Versatile Sizing: The Mud Crab Boat Stickers are available in various sizes to suit your boat's dimensions perfectly.  Not seeing the size you want?  Contact us to customise the sticker to your requirements

Additional information

Dimensions N/A
Fish Sticker size

320mm, 640mm, 990mm, 1300mm