Black GT Fish Sticker


Premium quality GT decals, printed on 3M vinyl. The most vivid and durable fish stickers on the market. Available in four sizes from 320mm long to 1300 mm long, port and starboard mirror sets.

SKU: N/A Category:


Applying the Black GT Fish Sticker

The Black GT is a very popular boat wrap and print. This fish sticker is a stand alone decal for your boat.

Gather the following materials before applying the sticker to your boat:

  • Fish Sticker
  • Mild detergent (dish washing liquid)
  • Water
  • Clean cloth or sponge
  • Squeegee or credit card
  • Masking tape
  • Pin or needle

Preparing Your Boat for the Black GT Fish Sticker

  1. Cleaning the Surface: Begin by cleaning the area of your boat where you plan to place the fish decal. Use a mild detergent mixed with water and a clean cloth or sponge to ensure the surface is free of dirt, grime, and residue.  Allow the surface to dry completely before applying the vinyl sticker.


Applying the Black GT Fish Sticker

  1. Positioning the Sticker: Decide where you want to place the fish sticker on your boat and use masking tape to hold it in position temporarily.  Stand back from the boat so you can see the whole hull.  Take your time to make sure you are happy with the placement.
  2. Peeling Off the Backing: Gently peel off the backing of the sticker, being cautious not to touch the adhesive side with your fingers.
  3. Applying the Sticker: Slowly apply the sticker onto the boat’s surface, starting from one edge and gradually moving across. Use a squeegee or credit card to press the sticker firmly onto the surface.  If you have a large sticker work from the centre out on each side.
  4. Removing Air Bubbles: If air bubbles appear, use a pin or needle to carefully puncture the bubble. Then, press the air out towards the puncture point and smooth over the area with your finger or the squeegee.

Final Touches and Maintenance

After applying the fish decal, remove any masking tape used and inspect the sticker for imperfections. Avoid using harsh chemicals or abrasive cleaners on the sticker to prevent damage. With proper care, your fish decal will enhance the look of your boat for a long time.

Additional information

Dimensions N/A
Fish Sticker size

320mm, 640mm, 990mm, 1300mm